WiseBond® Bar & Table Top Epoxy 1:1 Ratio

2-Gallon Kit Bundle: Two 1/2-Gal A & Two 1/2-Gal B WiseBond Bar & Table Top Epoxy is a super wet gloss epoxy for bar and table top epoxy coating. This wood and concrete counter top epoxy is a self-leveling high gloss finish epoxy that is UV stable for surface flood coatings. This thin pour epoxy produces a rich super gloss look and is typically used for a 1/8 in. thick finish coat for bar tops, tables, river tables and most any table or counter top surface. It delivers a flood coat ideal for applications requiring a high level of see through transparency and high gloss. It can also be tinted with mica powders, dyes and alcohol pigments for stunning faux table top finishes. WiseBond Bar & Table Top Epoxy features a 1:1 mix ratio and a low exothermic reaction cure, giving plenty of time to perfect your wood table project. It has virtually no odor and can be used indoors without ventilation or bulky respiration equipment. FDA Food Safe Compliant(CFR 175.300 – Code of Federal Regulations Title 21) Super wet gloss Self-leveling flood coat Low heat & low odor Zero VOC & food safe Bar tops & counter tops River & Live edge table coating High UV resistance Crystal clear, high gloss Easy to use 100% solids NOTE: WiseBond Epoxies are 100% solids and VOC-Free. Once epoxy is mixed properly according to the instructions and fully cured for 30 days, it is an inert plastic. It is not antimicrobial. Epoxy is not safe to ingest (liquid or cured). Do not cut on or prepare raw food on epoxy surfaces. SAFETY: Products “WiseBond Deep Pour 2” Epoxy: Part A and B, and WiseBond Bar & Table Top Epoxy: Part A and B”, are resinous polymeric coatings. These resinous polymeric coatings have been tested by an independent Testing, Inspection and Certification laboratory for conformity to Food and Drug Administration (FDA) standards as required by USFDA 21 CFR 175.300 Condition E from Table 2. Tested epoxy passed the CFR extraction testing under the conditions of use that were requested. The products were found to be in compliance with the US Food and Drug Administration regulation, 21 CFR 175.300, Condition E, for surfaces in contact with food at room temperature. Other conditions of use or variations in application of the resin for the specific application would potentially require follow up testing. NOTE: The above statement refers to “clear” epoxy only. Adding any type of colorant to either epoxy, alters the epoxy formula and it will no longer conform to the USFDA 21 CFR 175.300 tested results. Epoxy can and will melt when exposed to a flame and can catch fire. Always keep away from heat and open flames. When exposed to higher temperatures, a maximum of 120F (50C) should be adhered to at all times. INSTRUCTIONS Important Notes Each epoxy kit includes a resin (Part A) and a hardener (Part B). The 1 Gallon Kit includes 1/2 gallon of resin and 1/2 gallon of hardener. Mix equal parts of A and B together. Mix thoroughly for three (3) minutes and apply to the surface between 77°F- 85°F. Allow 24 hours between pouring additional layers. Wait 3 days for a full cure and 30 days for a full hard cure. Instructions SDS – Part A SDS – Part B Use & Care Guide Epoxy Coverage Calculator Part A – CALIFORNIA PROPOSITION 65: WARNING: Chemicals known to cause cancer: None. Part B – CALIFORNIA PROPOSITION 65: WARNING: This product can expose you to the chemical (Propylene Oxide CAS 75-56-9) which is known to the State of California to cause cancer.

Order Processing: After your payment is authorized and verified, we will start processing your order and this process can take from 1 to 2 business days, so please be patient with us. If we are unable to process your order due to inaccurate or incomplete payment or incorrect address information, your order processing may be delayed.

Carrier: UPS/FedEx/USPS. Delivery Timescale: More than 90% of orders arrive in 10 business days after despatch.

FREE RETURNS on all orders!
The following conditions must be met:

1. Items must be returned within 30 days after the purchase date.
2. Items must be unworn, undamaged and in original packaging.